Picture 57: Creating A Job - Image Access WideTEK 42 Manual Manual

Picture 57: Creating a job

Picture 58: Entering the password
Tapping in the empty field opens the screen with the alphanumeric keyboard (Picture 56).
Enter the password.
Tap on the checkmark button in the alphanumeric keyboard to confirm the password and
to return to the former screen.
Picture 59: Number of password elements
If no password for the job is necessary, tapping on Create opens a screen where the
operator is asked to confirm the new job name. This is easily done with the Yes button.
Page 62
Tap on Create to save the job.
Tap on with password to save the job in
combination with a password.
Tap on Cancel to cancel the procedure.
If a password should be used, tapping on the
button with password opens a screen as shown
in the picture on the left.
The screen now shows the number of elements
of the password.
Tapping on Ok returns to the list of available jobs
(Picture 55).
The job is now active.
Manual