Table of Contents
Advertisement
Locations and Functions of Parts
Inside panel
a CANCEL button
b Digital interface connector
c DISPLAY button and display
DISPLAY
CANCEL
TX ON
ON
OFF
DC LINE
DC OUT 12V
e DC LINE switch
d TX ON button
a CANCEL button
Press the button to return to the upper menu layer in a
menu operation.
For details on menu operations, see "Menu Settings" on
page 15.
b Digital interface connector (40-pin)
For data commnunication with a Camcorder. This
connector is used when the transmitter is directly docked
on a Camcorder.
c DISPLAY button and display
The display shows various information, such as the
operation statuses, setting menus, and alarm messages.
You can turn the display ON/OFF with the DISPLAY
button.
When you turn on the power to this unit, CPU initialization
begins, and an initialization message appears.
MENU
Rear panel
f MENU knob
DC IN
j Battery attachment
i DC IN connector
h DC OUT connector
When the initialization ends, the display changes to the
status indications.
Status indications
Transmission frequency
2406MHz
Standard
Transmission mode
If an error is generated, an alarm message will be displayed
at the center of the display.
g RF OUT connector
k SPARE connector
Time interleave mode
Output mode
High
Fast
13.5V
DC voltage
Locations and Functions of Parts
11
Advertisement
Table of Contents
