Power Supply; Operating On The Battery Pack - Sony WLL-CA50 Operation Manual

Power Supply

This transmitter operates on a battery pack or AC power
(with an AC-DN10).

Operating on the Battery Pack

Before use, charge the battery pack with a battery charger.
For details on charging method and time, refer to the
manuals for the battery pack and battery charger.
To attach a battery pack
1
Press the battery pack against the back of the
transmitter, aligning the side line of the battery pack
with the matching line on the transmitter.
2
Slide the battery pack down until its "LOCK" arrow
points to the matching line on the transmitter.
14
Power Supply
To detach the battery pack
Before removing the battery pack, set the DC LINE switch
to OFF.
Battery pack
Align these
lines.
"LOCK" arrow
Matching line on
the transmitter
Holding the button
in, pull the battery
pack upward.