Locations And Functions Of Parts; Ccd Block Adaptor - Sony HKC-T1500 Operation Manual

Locations and Functions of Parts

CCD Block Adaptor

a INTERCOM MIC switch
b INTERCOM LEVEL control
c Filter buttons
d Assignable button
a INTERCOM MIC (intercom microphone) switch
To turn on/off the microphone of an intercom headset.
Set the MIC switch for INTERCOM of the camera to OFF
to use the microphone of an intercom headset.
b INTERCOM LEVEL control
Functions the same as the INTERCOM LEVEL control on
the front of the camera. You can adjust the intercom audio
reception level with this control by setting the MIC switch
for INTERCOM of the camera to FRONT. (In this case, the
INTERCOM LEVEL control on the front of the camera
becomes inoperative.)
c Filter buttons
Functions the same as that on the camera.
d Assignable button
Functions the same as that on the camera.
30
Locations and Functions of Parts
IN T E
IN T E
M IC
R C O
M
O N
L E V E
L
O F F
F IL T
E R
L O C
A L
N D
C C
F IL T
E R
1
C L E
2 A R
N D 1 /4 N
3 D
1 /8 N
4 D
1 /1 6
N D
5
1 /6 4
N D
A
C R O
B S S
3 2 0 0
C C
C K
4 3 0 0
D K
6 3 0 0
E K
8 0 0 0
K
e Tally lamp and tally switch
ON: To have the tally lamp light when a tally signal or a
call signal generated by pressing a CALL button is
received (The lamp functions the same as the tally lamp
in the viewfinder.)
OFF: To prevent the tally lamp from lighting
f INTERCOM connector (XLR 5-pin)
Used for input and output of intercom audio signals.
g CAM BODY (camera body) connector (55-pin)
Used to connect to the OPT HEAD connector on the cable
adaptor mounted in the camera, using the supplied special
HDCM cable.
h LENS connector (12-pin)
Used to connect the cable of the mounted lens.
i Lens cable clamps (on the bottom)
To secure the lens cable.
e Tally lamp and tally switch
M
R C O
f INTERCOM connector
g CAM BODY connector
S
L E N
h LENS connector
i Lens cable clamps (on the
bottom)