Locations And Functions Of Parts - Sony F23 Operation Manual

Locations and Functions of Parts

a Cable hanger
b DC IN connector
a Cable hanger
You can fix cables on this, using bundlers.
b DC IN connector (XLR 4-pin)
Connecting the BKP-L551 Battery Adaptor or a specified
power cable, supply power to the camera and this unit. This
is effective only when this unit is mounted on the rear of
the camera.
c VTR connector (optical/electric composite
connector, female)
Connect to the CAMERA connector of the HKSR-101
mounted on the SRPC-1 using a hybrid optical camera
cable.
d OPT (optical level) indicator
It lights up when communication between the camera and
recorder is established, indicating the optical level status.
Lighting Meaning
color
Green Normal level
Yellow Cautioning
level
20
Locations and Functions of Parts
Measures to be taken
Sufficient for operation, but the
optical contacts may have some
dirt.
It is recommended to clean the
optical contacts of the unit and the
cable (see page 26).
Viewfinder shoe receptacle (see page 23)
Lighting Meaning
color
Red Warning
level
Unlit No signal, or
unusable
level
Note
The optical level is also decreased if the camera cable
between the camera and the recorder is long or has many
junctions.
e Camera connector 1
Video/audio and control signals are sent/received to/from
the camera.
f Camera connector 2
Power is sent/received to/from the camera.
For details on power supply, see page 24.
c VTR connector
d OPT indicator
Rubber cap for the
VTR connector
e Camera connector 1
f Camera connector 2
Measures to be taken
Immediately clean the optical
contacts of the unit and the cable
(see page 26).
Immediately clean the optical
contacts of the unit and the cable
(see page 26). If the indicator
remains unlit, check the
connections and the recorder
operation.