ZyXEL Communications Prestige 660W Series Compact Manual page 34

Figure 23 Adding/Editing Source and Destination Addresses
The following table describes the labels in this screen.
Table 9 Adding/Editing Source and Destination Addresses
LABEL
Address Type
Start IP
Address
End IP
Address
Subnet Mask
Prestige 660W/HW
Do you want your rule to apply to packets with a particular (single)
IP address, a range of IP addresses (e.g., 192.168.1.10 to
192.169.1.50), a subnet or any IP address? Select an option from
the drop down list box
Enter the single IP address or the starting IP address in a range
here.
Enter the ending IP address in a range here.
Enter the subnet mask here, if applicable.
DESCRIPTION
34