ZyXEL Communications Prestige 660W Series Compact Manual page 31

LABEL
The following read-only fields summarize the rules you have created that apply to traffic
traveling in the selected packet direction. The firewall rules that you configure
(summarized below) take priority over the general firewall action settings above.
No.
Source IP
Destination IP
Service
Action
Log
Rules Reorder
To Rule
Number
Move
Follow these directions to create a new rule.
Step 1.
In the Summary screen, click a rule's index number. The Edit Rule screen
opens.
Step 2.
In the Available Services text box, select the services you want. Customize
ports for services not predefined by the Prestige by clicking the Edit
Prestige 660W/HW
Table 7 Rule Summary
This is your firewall rule number. The ordering of your rules is
important as rules are applied in turn. The Move field below allows
you to reorder your rules.
This drop-down list box displays the source addresses or ranges of
addresses to which this firewall rule applies. Please note that a
blank source or destination address is equivalent to Any.
This drop-down list box displays the destination addresses or
ranges of addresses to which this firewall rule applies. Please note
that a blank source or destination address is equivalent to Any.
This drop-down list box displays the services to which this firewall
rule applies. Please note that a blank service type is equivalent to
Any.
This is the specified action for that rule, either Block or Forward.
Note that Block means the firewall silently discards the packet.
This field shows you if a log is created for packets that match the
rule (Match), don't match the rule (Not Match), both (Both) or no
log is created (None).
You may reorder your rules using this function. Select the rule you
want to move. The ordering of your rules is important as rules are
applied in turn.
Select the number you want to move the rule to.
Click Move to move the rule.
DESCRIPTION
31