ZyXEL Communications Prestige 660R-6 Series Read Me First

PORT
DSL Connect the DSL port on the Prestige to the wall jack using the included DSL cable (telephone wire).
Connect the micro filter(s) (optional – see the appendix in your User's Guide for details) between the wall
jack and your telephone(s).
LAN 10/100M Use an Ethernet cable to connect this port to a computer (with an Ethernet card) or a hub (if your network
has more than one computer). The port is auto-negotiating (can connect at 10 or 100Mbps) and auto-
crossover (automatically adjust to straight-through or crossover Ethernet cable).
RESET You only need to use this button if you have forgotten the Prestige's password or IP address. It returns the
Prestige to the factory defaults.
POWER Connect the end of the included power adaptor for your region to this power socket.
After you've made the connections, connect the power adaptor to a power supply and push in the power button to turn on the
Prestige.
LED COLOR
PWR Green
SYS Green
Prestige 660R-6x Read Me First
P r e s t i g e R e a
P r e s t i g e R e a
Be careful not to insert an RJ-11 connector into the RJ-45 port.
P r e s t i g e F r o n t
P r e s t i g e F r o n t
STATUS
On The Prestige is receiving power.
Off The Prestige is not receiving power.
On The Prestige is functioning properly.
Blinking The Prestige is restarting.
Off The Prestige is not ready or has malfunctioned.
r P a n e l C o n n e c t i
r P a n e l C o n n e c t i
CONNECTION
P a n e l L E D D e s c r
P a n e l L E D D e s c r
DESCRIPTION
o n s
o n s
i p t i o n
i p t i o n