Functional Test Of Umic; Setting The Umic Volume - Unitron uMic Manual

Functional test of uMic

Before using the system, perform
a quick functional test by gently
tapping on the microphone
opening.
You should clearly hear the tapping noise in
your hearing aids.
Line of sight between the uMic and the streamer
is usually not required. If the audio transmission
ends abruptly, refer to the troubleshooting
guide.
14

Setting the uMic volume

To change the uMic volume:
1. Speak into the uMic from a 20 cm (8")
distance.
2. Use the volume (
to set the uMic volume to a
comfortable volume level.
If your hearing aids pick up too much ambient
noise, use the following 2 steps to give the uMic
more focus:
1. Reduce the hearing aid volume by
pressing the uDirect 2
2. Then increase the uMic volume by
pressing the uMic ( ) button.
The uMic volume setting will be
stored even when switching off the uMic.
Your hearing healthcare professional can
change the level of the hearing aid microphones
while using the uMic to adjust the volume of
sounds around you.
) buttons
button.
( )
15