Power Switch; Power Switch Cover - Epson TM-C3400 Technical Reference Manual

Power Switch

Before turning on the printer, be sure to check that the AC adapter is connected to
the power supply.
CAUTION
• When DIP switch 1 is OFF, the power is turned on after the POWER button has been pressed
for 3 seconds.
• When DIP switch 1 is ON, the printer settings are reset after POWER button has been pressed
for 3 seconds.
See

Power Switch Cover

Attaching the power switch cover prevents accidental pressing of the power switch.
∗ To prevent the power switch from being pressed:
Attach the power switch cover as it is (without punching a hole in it).
∗ To prevent the power switch from being pressed unless a long, thin object is pressed into a hole in the
power switch cover:
Attach the power switch cover after punching a hole in it.
For details about attaching the power switch cover, see
Cover" on page
Be sure to change the DIP switch setting when you want to attach the power switch cover
without punching a hole in it. (See
Make sure to pull out the AC cable if the printer is damaged when attaching the
power switch cover. Using it as it is may cause a fire.
WARNING
18
"Setting the DIP Switches" on page 76
100.
for DIP switch setting.
"Attaching the Power Switch
"Setting the DIP Switches" on page 76.)