Connecting The Printer To The Host Computer; For Usb Interface Model - Epson TM-C3400 Technical Reference Manual

Connecting the Printer to the Host Computer

For USB Interface Model

Connect the printer to the host computer by the USB cable.
• Do not turn the power on until the printer driver is installed.
• Make sure to use the USB cable included with the printer.
Insert the USB cable to the USB connector on the lower rear of the printer and arrange it as
shown below.
Make sure to put the USB cable through the cable hook as shown in the figure below to prevent
the cable from coming unplugged.
Cable hook: Prevents cable from coming unplugged.
Chapter 2 Setup
2
67