Attaching The Power Switch Cover - Epson TM-C3400 Technical Reference Manual

Attaching the Power Switch Cover

Attaching the power switch cover prevents accidental pressing of the power switch.
Before attaching the power switch cover, set DIP switch 1 to ON. (For details, see "Setting
the DIP
switched by turning the AC supply on and off, and you can also control the printer power
with a device such as a distribution board In this case, the power switch is used to reset the
printer.
To prevent the power switch from being pressed
Attach the power switch cover as it is (without punching a hole in it).
1
Set DIP switch1 to ON.
2
Push the power switch cover onto the power switch of the printer.
100
switches"Function of the DIP Switches on page 77.) The printer power can then be