Epson TM-C3400 Technical Reference Manual page 33

Paper type
Form
Paper width
Black mark width
Black mark length
Black mark centering position
Black mark interval
Paper thickness
Pitch of perforated line:
Form of perforated line
Number of folds
• Do not use the paper with a hole or cutout.
• When using fanfold paper, the black marks must be at least 0.5 mm from the perforated
lines.
• Make sure to keep the same position of the black marks to the perforated lines (position
that can be detected by black mark sensor) when inserting the paper from either side in
order to use the paper inserting from reverse direction.
Plain Media, Fine Media, PET Film
Fanfold paper
50 to 108 mm
13 mm or more
9 mm or more
8.5 ± 1 mm
15 mm or more
0.119 to 0.151 mm
203.2 to 304.8 mm
Plain media : 1 mm uncut, 5 mm cut
Fine media : 1 mm uncut, 5 mm cut
PET film : 0.6 mm uncut, 8.4 mm cut
500 or less
Chapter 1 Product Overview
33
1