Epson TM-C3400 Technical Reference Manual page 50

Black Mark Die-cut Label / Fanfold paper
Top margin (inside the label):
Left and right margin (inside the label):
Bottom margin (inside the label):
Center of paper width
Perforated line
Auto-cut position
Auto-cut position
2.0 mm
Perforated line
Auto-cut position
2.0 mm
• Make sure to adjust perforated lines to an integral multiple of issuing pitch.
• The perforated line and print area overlap each other to destabilize printing or perforated
50
Paper width
Print area width
line and the auto-cut position are misaligned to shorten the life of the autocutter if paper
without black marks is used. Use paper with black marks on the back of the paper to
adjust the paper position.
2.0 mm (typical value)
2.0 mm (typical value)
2.0 mm (typical value)
2.0 mm
2.0 mm
Paper feeding
direction
Print area
Label area
Backing paper