Table of Contents
Advertisement
aSSemBlIng yoUr neW aPPlIanCe
PAge heAder.....
Once the timer has finished, the
12.
food processor will stop and go into
STANDBY mode. Three (3) beeps
will be sounded to indicate that the
processing is complete.
The processor incorporates a 'Safety
13.
Interlock System' that ensures the
unit will not start without the large
food pusher in position. Processing
will stop automatically, once
the large food pusher has been
removed from the lid. The chute
MAX fill graphic indicates the
maximum volume of food to be
placed in the chute for the pusher
to activate the unit.
At the end of processing, always
14.
wait until the blades or discs have
stopped spinning before unlocking
and removing the lid. To remove the
processing lid, ensure the POWER/
OFF button has been pressed, the
power is switched off at the power
outlet and the cord is unplugged
from the power outlet. Holding the
feed chute and pressing down firmly
at the same time, turn the lid anti-
clockwise so that the arrow graphics
are no longer aligned.
note
As a safety feature, the food processor
will automatically switch off when the
lid is unlocked, however, it is good
practice to manually switch off the
food processor using the POWER/
OFF button before removing the lid.
12
Remove the processing bowl (before
15.
removing blade or discs) by turning
it anti-clockwise until the handle is
in line with the ALIGN HANDLE.
Lift the bowl off the motor shaft.
When removing the discs - carefully
remove by gripping the plastic hub
on the centre of the disc and lifting
the disc up and away from the pin on
the spindle.
note
Reassemble the food processor by
locking the bowl into position before
attaching blade, disc or lid.
note
Care should be taken when removing
the food from the processing bowl by
ensuring the motor, processing blade,
dough blade or discs have completely
stopped before disassembling. Ensure
the POWER/OFF button is pressed
to switch the motor off, the appliance
is switched off at the power outlet
and it is unplugged, before removing
the lid from the bowl. The processing
bowl should then be unlocked from
the motor body, then the
processor, dough or disc carefully
removed before attempting to remove
the processed food.
4
blade
Hide quick links:
Advertisement
Table of Contents
