Changing Administrator Username And Password; Resetting The Sat-Fi To Factory Default - Globalstar Sat-Fi Installation And Configuration Manual

Changing Administrator Username and Password

The Username and Password are used to log in as administrator for the Sat-Fi User Interface.
To change your username and password perform the following:
1. In the Username field, enter a new username. This value must be 5 to 32 characters in length.
2. In the Password field, enter a new password. The password must be 8 to 63 characters in length
and can contain letters, numbers and special characters.
3. In the Confirm Password field, re-enter the same password you entered in Step 2.
4. Press the Submit button.
WARNING: Pressing the Submit button will automatically restart the Sat-Fi. You will be required
to sign in using your new username and password.
5. A warning dialog box will be displayed, press OK.

Resetting the Sat-Fi to Factory Default

Pressing the Factory Reset button will automatically restore the Sat-Fi to its original factory settings. The
Sat-Fi will automatically restart as part of the process and if the SSID and Password have been changed,
all smartphones and other wireless devices will have to manually reconnect and login to the Sat-Fi.
Sat-Fi Installation & Configuration Guide Page 23