Wi-Fi Clients Section - Globalstar Sat-Fi Installation And Configuration Manual

Wi-Fi Clients Section

The Wi-Fi Clients section displays the following characteristics of all current and recently connected
smartphones and other wireless devices.

MAC Address – Displays the Media Access Control (MAC) address of the connected device.
This is the unique hardware address of the Wi-Fi system within your device

Signal Avg – Displays the average received signal strength of the connected device. A series of
four bars displays the strength of the signal from the smartphone or other device. Devices with
fewer bars may have problems sending/receiving phone calls and data.

Bitrate – Displays the communication rate with the connected device

Authenticated – Displays whether the device has been authenticated
yes – The device will be able to send/receive calls and data
o
o
no - The device will not be able send/receive calls and data

Rx Bytes – Displays the total number of bytes that the Sat-Fi unit has received from a connected
device

Tx Bytes – Displays the total number of bytes that the Sat-Fi unit has transmitted to the
connected device

Inactive Time – Displays the amount of time since the smartphone or other wireless device has
last communicated with the Sat-Fi
Sat-Fi Installation & Configuration Guide Page 16