Wi-Fi Antenna And Power Connection - Globalstar Sat-Fi Installation And Configuration Manual

Wi-Fi Antenna and Power Connection

Perform the following for the Wi-Fi Antenna connection:
1. Place the rubber O-Ring over the Wi-Fi antenna port.
2. Connect the Wi-Fi antenna to the Wi-Fi port on the back of the Sat-Fi Unit - Finger tighten only.
3. Connect the appropriate power cable (120-240VAC/12VDC Power Supply or 12VDC Car Power
Adapter) to the 12VDC power port on the Sat-Fi unit.
Sat-Fi Installation & Configuration Guide Page 10