Change Of Subscribed System - LG GDK-186 User Manual

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide

6.6 Change of Subscribed System

The wireless terminal may have subscription information for 4 systems at the same time. The last
subscribed system information or the subscribed system information which is selected as the
following steps is only available system information currently.
Press MENU(UP or DOWN) button.
(Or set ' > ' mark to '3 Select BS' by pressing UP( ) button or DOWN( ) button
Press
and press OK button).
The current FT number and PARK value are displayed on the LCD.
If necessary, press UP( ) button or DOWN( ) button to select FT number and press OK
button when the FT number and PARK value of system that a user want to use is displayed on
the LCD.
And then, the wireless terminal searches for the selected system.
! Notice
1. FT numbers are displayed together with ')' except for the current locked system number. It
uses '*' instead of ')'. So a user recognized easily the locked system by different display.
2. When you choose the Best Base, the base station of closest system is automatically
detected as soon as the signal of the previously selected base station is lost.
3. A user can recognize easily Best Base is enabled by '*' in front of Best Base.
Press MENU(UP or DOWN) button.
Press
button and press OK button).
The current FT number and PARK value are displayed on the LCD.
Press UP( ) button or DOWN( ) to select Best Base and press OK button.
And then, the wireless terminal will beep to confirm that it is now searching for the
base station of closest system among the subscribed systems.
(Or set ' > ' mark to '3 Select BS' by pressing UP( ) button or DOWN( )
６９