Preparation - LG GDK-186 User Manual

Wireless terminal
Table of Contents

Advertisement

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide

1.3 Preparation

Below table shows the maximum cell number, maximum registrable terminal number, and
maximum simultaneous wireless call number in different configurations of GDK-
186/100/34E/20W & LDK-130/300/600 system and the applicable S/W version of GDC-345H
handset. Please note that only one(1) WTIB(with WTIU) board can be installed in GDK-
186/100/34E/20W system, one(1) WTIB board can be installed in LDK-24 system, two(2)
WTIB(with WTIU) boards can be installed in LDK-130 system and three(3) WTIB(with WTIU)
board can be installed in LDK-300/600 system. (The WTIU board is not prepared in the GDK-
20W system.)
Items
1. Board
System
Name
GDK-186
With WTIU
GDK-100
With WTIU
GDK-34E
With WTIU
GDK-20W
LDK-24
LDK-130
With WTIU
LDK-300/600
With WTIU
The wireless terminal should be subscribed before using it. (Please refer to '6. Installation of
Wireless Terminal')
A call may be failed even when free channels exist due to unexpected changes of radio
environment.
When all channels are occupied, no more call can be made. In this case, a user should wait
until a channel becomes free.
The S/W of a wireless terminal can be updated by the manufacturer.
The working area of your hand-held type wireless terminal is limited to the domain of the
coverage area of a wireless system, which may be adjusted to a premise of an organization,
an office, or a company. Using a terminal outside of this area will bring unsatisfied results.
A hand-held type wireless terminal is not specified as intrinsically safe. So do not use it in
hazardous area or intent.
If a user doesn't use matched configuration, the normal operation can't be guaranteed.
If you are out from the range of a base station for a long time with your handset power-
on, it may fail to find the base station again when you are in the range. In that case,
refresh the power of the handset or press "[MENU key] + [3] + [OK key]"
2. Max.
Cell Number
Name
(Base Station
Num.)
WTIB
3
6
WTIB
4
8
WTIB
4
8
MBU
1
WTIB
3
WTIB
3
WTIB
4 ( x 2 )
(MAX. 2)
8 ( x 2 )
(MAX. 2)
WTIB
4 ( x 3 )
(MAX. 3)
8 ( x 3 )
(MAX. 3)
4. Registrable
3. Channels/
Max.
Cell
Terminal Number
5
8~96 by step 8
5
8~96 by step 8
5
8~64 by step 8
5
8~64 by step 8
5
8~32 by step 8
5
8~32 by step 8
4
20
4
20
2
12
5
8~80 by step 8
5
8~80 by step 8
5
8~192 by step 8
5
8~192 by step 8
5. Max.
6. Applicable
Simultaneous
SW version
Wireless Call
(GDC-345H)
15
All version
30
16
All version
32
16
All version
16
4
All version
12
6
All version
32
All version
64
48
All version
96

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gdk-34eGdk-20wGdk-100Ldk-130Ldk-300Ldk-600

Table of Contents