LG GDK-186 User Manual page 67

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide
1. M M
ANUAL ODE
MENU(UP or DOWN) key + 5 + 1 + PARK + REDIAL(
FT #
+ OK (
GDC-345H
U N R E G I S T E R E D
1) Press MENU(UP( ) or DOWN( ) button.
2) Main Menu is displayed on the LCD.
3) Press
button and press OK button).
4) System menu is displayed on the LCD.
5) Press
button and press OK button).
6) Enter PARK length and PARK value.
7) Press REDIAL (
8) Enter AC code.
9) Press REDIAL (
10) '1', '2', '3', '4' or '_' are displayed on the LCD. A number means FT number that it is not
occupied yet. The under-bar means the wireless terminal is already subscribed to the
system. Therefore, the number of '_' means the number of subscribed system. If 4 under-
bar are displayed on the LCD, that means no subscription is allowed any more. Enter FT
number by pressing numeric key if any number exists. After selecting, it is possible to re-
select FT number by pressing FLASH button on cancel selection.
11) Press OK button
12) Success or failure of the subscription is notified with confirmation tone to the attendant
and the wireless terminal.
13) If succeeded in subscription, the wireless terminal goes to an idle state and its station
number is displayed.
14) If failed, repeat 3) ~ 6) steps of the attendant and 1) ~ 7) steps of wireless terminal.
GDC-345H
S U B S C R I B I N G
) key
(or set '>' mark to '5 System' by pressing UP( ) button or DOWN( )
(Or set ' > ' mark to '1 Register' by pressing UP( ) button or DOWN( )
) key.
) key.
) + AC code + REDIAL(
S T A X X X
６１
) +