LG GDK-186 User Manual page 23

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide
method is programmable by Admin programming.
88+CO line # : Connect the CO line directly. The CO line should be allowed to the station
before by Admin programming.
Receiving an Incoming Call
Incoming CO ring →
R I N G I N G
L N X X X
1 2 3
4 5 6
7 8 9
0 #
*
To hang up the call;
When conversation is over, press
will be disappeared and the call will be cut off.
Notes:
When you release a call, you can do it by pressing a button on Ear-Mic.
Making an Intercom Group Call
1) Pre-Dial : Intercom group number →
Dial the intercom group number (ex. GDK-186: 620~649).
Press button.
Connection tone is heard and phone(
→ Intercom group number → Connection
2) Post-Dial :
C A L L X X
V I A H U N T
Connection tone is heard and phone(
1 2 3
4 5 6
7 8 9
0
#
*
→ Connection
1. Incoming CO ring is heard and a message is displayed on the
LCD.
Notes: If an Ear-Mic is attached to a GDC-345H, it can receive
an incoming call by pressing a button on the Ear-Mic while a
ring sounds.
Press button and answer the call.
If pressing UP( ),DOWN( ) button during conversation, the
receiving voice level is controlled.
button again to release the call. Then the phone(
→ Connection
) icon is displayed on the LCD.
Press
) icon is displayed on the LCD.
Dial the intercom group number
(GDK-186:620~649,GDK-100:620~634,
１７
button.
) icon