LG GDK-186 User Manual page 31

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide
( Refer to "PROGRAMMING A NAME INTO DISPLAY")
Press FUNCTION (
Press button.
You can store speed dials by repeating the above procedure.
STOP!
If all speed bins are stored, speed bin number is displayed as '000' on the LCD.
You can newly edit speed bin that is already used.
Using Station Speed Bin Numbers
S P D _ N O
L ( * ) S ( # )
Erasing Station Speed Bin Numbers
Press
Press FUNCTION (
Press SPEED (
E N T E R S P D
B I N ( X X )
Storing System Speed Bin Numbers
You can use commonly speed dial numbers stored in the system.
Storing system speed dial number can be done only at the admin station.
Available CO line can be assigned at that time storing system speed dial number.
Using System Speed Numbers
S P D _ N O
L ( * ) S ( # )
Caution : S(#) is not displayed in the GDK-20W.
STOP!
When a user makes a call to some exclusive subscribers or all CO line are reserved, error
tone is heard.
) button longer than 1 second.
Press
Press SPEED (
Dial speed bin number(GDK-186/100/34E: 00~19,
GDK-20W: 01~20,LDK-130/300/600: 000~099).
Caution: S(#) is not displayed in the GDK-20W.
button.
) button longer than 1 second.
) button shorter than 1 second.
Dial speed number bin to be erased.
Press FUNCTION (
(Confirmation tone will be heard)
Press
Press
Press SPEED (
Dial speed bin number.
(GDK-186: 200~999, GDK-100/34E: 200~399,
GDK-20W: 21~99, LDK-130: 2000~3499,
LDK-300: 2000~4999, LDK-600: 2000~6999).
button.
) button shorter than 1 second.
) button longer than 1 second.
button.
button.
) button shorter than 1 second.
２５