LG GDK-186 User Manual page 59

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide
Press MENU(UP( ) or DOWN( ) button.
Main Menu is displayed on the LCD.
Press
button and press OK button).
HS Setting Menu is displayed on the LCD.
Press
and press OK button).
The ExtRing menu is displayed on the LCD.
Press
and press OK button).
The current ring volume level is displayed on the LCD. The initial setting is level 3.
Press UP( ) button or DOWN( ) button to select a preferable ring volume level(0~6).
Press OK button to change the setting or press FLASH button to maintain the current
setting and to return to ExtRing Menu.
While operating, a user can receive a call when there is an incoming call.
3) IntRing
① Ring Type Selection
Press MENU(UP( ) or DOWN( ) button.
Main Menu is displayed on the LCD.
Press (or set '>' mark to '1 HS Setting' by pressing UP( ) button or DOWN( )
button and press OK button).
HS Setting Menu is displayed on the LCD.
Press (or set '>' mark to '3 IntRing' by pressing UP( ) button or DOWN( ) button
and press OK button).
The IntRing menu is displayed on the LCD.
Press (or set '>' mark to '1 Melody' by pressing UP( ) button or DOWN( ) button
and press OK button).
The current ring type is displayed on the LCD. The initial setting is 'Type 1'.
Press UP( ) button or DOWN( ) button to select a preferable ring rhythm.
Press OK button to change the setting or press FLASH button to maintain the current
setting and to return to IntRing Menu.
While operating, a user can receive a call when there is an incoming call.
② Ring Volume Selection
Press MENU(UP( ) or DOWN( ) button.
Main Menu is displayed on the LCD.
Press (or set '>' mark to '1 HS Setting' by pressing UP( ) button or DOWN( )
button and press OK button).
HS Setting Menu is displayed on the LCD.
Press (or set '>' mark to '3 IntRing' by pressing UP( ) button or DOWN( ) button
and press OK button).
The IntRing menu is displayed on the LCD.
Press
and press OK button).
The current ring volume level is displayed on the LCD. The initial setting is level 3.
(or set '>' mark to '1 HS Setting' by pressing UP( ) button or DOWN( )
(or set '>' mark to '2 ExtRing' by pressing UP( ) button or DOWN( ) button
(or set '>' mark to '2 Volume' by pressing UP( ) button or DOWN( ) button
(or set '>' mark to '2 Volume' by pressing UP( ) button or DOWN( ) button
５３