Mitsubishi Lancer Sportback Owner's Manual page 389

Maintenance
3. Remove the bulb by pulling it out.
4. To install the bulb, perform the removal
steps in reverse.
Front fog lamps (Type 1)*
1. Remove the screw (A) and pull the cover out.
8
2. Remove the screws (B) and pull the entire
lamp unit out.
8-36
NOTE
l When unfastening the screws, be careful not
to mistakenly move the beam position adjust-
ment screw (C).
E01004001120
OG4E12E1
3. Push the connector (D) to disconnect and re-
move the fog lamp.
4. Remove the bulb assembly (E) by turning it
anticlockwise.
CAUTION
l Handle halogen lamp bulbs with care.
The gas inside halogen lamp bulbs is high-
ly pressurized, so dropping, knocking, or
scratching a halogen lamp bulb can cause
it to shatter.