Mitsubishi Lancer Sportback Owner's Manual page 242

2. Set the temperature control dial to the de-
sired temperature.
3. Set the mode selection dial to the "AUTO"
position.
The outlet position (except " "), recirculation/out-
side air select and blower speed, and ON/OFF of
air conditioning will be controlled automatically.
To stop the system, turn the blower speed selection
dial to the "OFF" position.
CAUTION
l When using the air conditioning, the
idling speed may slightly increase as the
air conditioning compressor is switched
on/off automatically. While the vehicle
equipped with CVT or Twin Clutch SST
is stationary, fully depress the brake ped-
al to prevent the vehicle from creeping.
NOTE
l While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial. To prevent the windscreen and win-
dows from fogging up, the ventilator mode
will be changed to " " and the blower
speed will be reduced.
l If the blower speed selection dial, air condi-
tioning switch, mode selection dial, or air se-
lection switch is operated while the system is
operating in the AUTO mode, the activated
function overrides the corresponding func-
tion of automatic control. All other functions
remain under automatic control.
Operating the system in manual air
mode
E00704200095
Blower speed and ventilator mode may be control-
led manually by setting the blower speed selection
dial and the mode selection dial to the desired posi-
tions. To return to automatic operation, set the dials
to the "AUTO" position.
Demisting of the windscreen and door windows
E00704300807
CAUTION
l For safety, make sure you have a clear
view through all the windows.
To remove frost or mist from the windscreen and
door windows, use the mode selection dial ("
or " ").
OG4E12E1
For pleasant driving
For ordinary demisting
Use this setting to keep the windscreen and door
windows clear of mist, and to keep the leg area heat-
ed.
1. Set the air selection switch (A) to the outside
position.
2. Set the mode selection dial to the "
tion.
3. Select your desired blower speed by turning
the blower speed selection dial.
4. Select your desired temperature by turning
the temperature control dial.
5. Push the air conditioning switch (B).
"
" posi-
5
5-15