Mitsubishi Lancer Sportback Owner's Manual page 304

To pair
®
To pair a Bluetooth device with the Bluetooth
2.0 interface, follow the steps below.
1. Stop your vehicle in a safe area, put the gear-
shift lever (M/T) in the "N" (Neutral) posi-
tion, or the selector lever (CVT) or gearshift
lever (Twin Clutch SST) in the "P" (PARK)
position, and pull the parking brake lever.
NOTE
l ®
You cannot pair Bluetooth devices with the
®
Bluetooth 2.0 interface unless the vehicle is
®
parked. Before pairing a Bluetooth
®
with the Bluetooth 2.0 interface, confirm
that the vehicle is parked in a safe location.
2. Press the SPEECH button.
3. Say "Setup".
4. Say "Pairing options."
5. The voice guide will say "Select one of the
following: pair, edit, delete, or list." Say
"Pair."
NOTE
l If 7 devices have already been paired, the
voice guide will say "Maximum devices
paired" and then the system will end the pair-
ing process. To register a new device, delete
one device and then repeat the pairing proc-
ess. (Refer to "Deleting a device" on page
5-77.)
6. The voice guide will say "Please say a 4-dig-
it pairing code." Say a 4-digit number.
When the confirmation function is on, the sys-
tem will confirm whether the number said is
acceptable. Answer "Yes."
Answer "No" to return to pairing code selec-
tion.
®
NOTE
l ®
Some Bluetooth devices require a specific
pairing code. Please refer to the device man-
ual for pairing code requirements.
l The pairing code entered here is only used
®
for the Bluetooth connection certification.
It is any 4-digit number the user would like
to select.
Remember the pairing code as it needs to be
®
keyed into the Bluetooth
device
pairing process.
Depending on the connection settings of the
®
Bluetooth device, this code may have to be
entered each time you connect the Blue-
®
tooth device to the Bluetooth
face. For the default connection settings, re-
fer to the instructions for the device.
7. The voice guide will say "Start pairing proce-
dure on the device. See the device manual
for instructions." Enter in the Bluetooth
vice the 4-digit number you have registered
in Step 6.
NOTE
l According to the corresponding device to
®
Bluetooth , it might take a few minutes to
®
pair the Bluetooth device with the Blue-
®
tooth 2.0 interface.
OG4E12E1
l
If the Bluetooth
nize the Bluetooth
will say "Pairing has timed out" and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
ports Bluetooth
l If you enter the wrong number, the voice
guide will say "Pairing failed" and the pair-
ing process will be cancelled.
Confirm the number is right, and try pairing
it again.
device later in the 8. The voice guide will say "Please say the
name of the device after the beep." You can
assign a desired name for the Bluetooth
vice and register it as a device tag. Say the
name you want to register after the beep.
®
2.0 inter-
NOTE
l When the confirmation function is on, after
repeating the device tag you have said, the
voice guide will ask "Is this correct?" An-
swer "Yes."
To change the device tag, answer "No" and
®
de-
then say the device tag again.
9. The voice guide will say "Pairing complete,"
after which a beep will be played and the pair-
ing process will end.
Selecting a device
If multiple paired Bluetooth
in the vehicle, the cellular phone or music player
most recently connected is automatically connected
®
to the Bluetooth 2.0 interface.
For pleasant driving
®
2.0 interface cannot recog-
®
device, the voice guide
®
, and try pairing it again.
®
de-
5
E00760700074
®
devices are available
5-77