Mitsubishi Lancer Sportback Owner's Manual page 118

"Information display (when the ignition
switch is "ON")" on page 3-11.
Type 1 Type 2
CAUTION
l
For safety, stop the vehicle before operat-
ing.
While driving, even if you operate the mul-
ti-information meter switch, the function
setting screen is not displayed.
3. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Type 1
Type 2
NOTE
l To return the menu screen to the function set-
ting screen, press and hold the multi-informa-
tion meter switch for about 2 seconds or more.
l If no operations are made within about 15 sec-
onds of the menu screen being displayed, the
display returns to the function setting screen.
OG4E12E1
Instruments and controls
4. Select the item to change on the menu screen
and change to the desired setting. Refer to
the following items for further details on the
operation methods.
Refer to "Changing the reset mode for aver-
age fuel consumption and average speed" on
page 3-19.
Refer to "Changing the fuel consumption dis-
play unit" on page 3-20.
Refer to "Changing the temperature unit" on
page 3-21.
Refer to "Changing the display language" on
page 3-21.
Refer to "Changing the language cooperative
control*" on page 3-22.
Refer to "Operation sound setting" on page
3-22.
Refer to "Changing the time until "REST RE-
MINDER" is displayed" on page 3-23.
Refer to "Changing the turn-signal sound"
on page 3-24.
Refer to "Changing the momentary fuel con-
sumption display (Type 2)" on page 3-24.
Refer to "Returning to the factory settings"
on page 3-24.
Changing the reset mode for average fuel con-
sumption and average speed
E00522900917
The mode conditions for the average fuel consump-
tion and average speed display can be switched be-
tween "Auto reset" and "Manual reset".
3
3-19