Final steps – Vertical air intake
1.
Install compressor casing (2).
2.
Tighten screws (1) to specified torque using a torque wrench.
Name
Screw
3.
Install coolant ventilation line and coolant lines on compressor housing.
4.
Install intake housing (3) with actuating cyl-
inder (2).
5.
Align clamp (1) and tighten to specified torque using a torque wrench.
Name
Clamp
Size
Type
Tightening torque
Size
Type
Tightening torque
Lubricant
(Engine oil)
Lubricant
MS150068/01E 2014-01 | Task Description | 211
Value/Standard
20 Nm + 2.5 Nm
Value/Standard
15 Nm + 2 Nm