Hand-Held Control Head - Tait TM8100 Installation Manual

4.4

Hand-Held Control Head

The TMAC70 is a hand-held control head for mobile radios that enables the
Hand-Held Control
Head
user to operate the radio at a distance from the radio body. The hand-held
control head plugs into one of the RJ45 sockets on the appropriate remote
control head. A remote speaker is required when a hand-held control head
is installed. Refer to the TMAC70 Hand-Held Control Head Installation
Instructions (402-00042-xx) for full details.
The TMAA03-32 is an installation kit for remotely mounting the TMAC70
Remote Hand-Held
Control Head
hand-held control head. The following diagram summarizes how the
components are installed. The items named or shown in bold below are part
of the kit. Refer to the TMAA03-32 Hand-Held Control Head Remote
Interface Kit Installation Instructions (402-00044-xx) for full details.
antenna
TM8100/TM8200 Installation Guide
© Tait Limited November 2012
TMAC70 hand-held
control head
Ch an ne l 12
Zo ne 11
Me nu
Ta lkg r
microphone
clip
8mm Allen key
power auxiliary
connector connector
combining
cable
radio body
remote control head
TMAA10-03 or TMAA10-06
remote speaker
remote control head
6m
remote cable
TMAA03-29
remote
interface box
ignition
sense cable
remote speaker
Installation Options
hand-held
TMAC70 TMAC70
control head
hand-held
TMAC70
control head
remote PTT
remote
microphone
37