Toshiba RAV-SM563UT-E Service Manual/Integration page 187

No. Photo / Explanatory diagram
1-5
Valve fixing plate
1-6
1-7
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Motor base
assembly
Partition plate
assembly
Sound
insulation board
Heat exchanger
Compressor
– 187 –
www.heronhill.co.uk
Procedure
Remove the motor base assembly, partition plate
assembly and the sound insulation board.
Related parts / Screws list
Part name
Motor base assembly
(Including motor and fan)
Partition plate assembly
(Including reactor)
Remove the fixing screws of the heat exchanger and the
valve fixing plate. Remove the compressor fixing bolt.
Related parts / Screws list
Part name
Heat exchanger
Valve fixing plate
Compressor
As shown in the left figure, remove the set of refrigera-
tion cycle assembly from the outdoor unit base plate.
* In this time, work attentively so that the cycle pipes are
not damaged by dent or deformation. Apply protective
measures to pipes if necessary.
Used screw
Screw type Quantity
Ø4 × 8 2
Ø4 × 8 3
Used screw
Screw type Quantity
Ø4 × 8 1
Ø4 × 8 1
bolt 3
Fax: 01823 665807