Programmed Playback - C.E.C. CD3N Owner's Manual

month), remove the batteries to prevent leakage.
❸ If the batteries leak, use a cloth to wipe away the liquid inside the battery compartment and
replace the batteries with new ones.
❹ Do not heat or disassemble batteries, and never dispose of old batteries by throwing them
in a fire. Dispose of batteries following laws in the local area

Programmed Playback

● Programming
You can program up to 32 tracks in a customized playback order, by using the remote control
unit while playback is stopped.
❶ Press the PROGRAM button on the remote control unit to activate the program mode.
Track number
track will be added to the program. For example: Press key-5 to add the 5th track to the 1st
playback order, then press key-3 to add the 3rd track to the nd playback order. Repeat this
process to program additional tracks.
Note:
※ In case that a number beyond the last track number on a disc is selected the last track may
be added alternatively.
※ After the 1st playback track is added you can select an addition track by pressing skip
buttons as well. The selected track number blinks. Then press the PROGRAM button to add
the track to the program. In this way press the PROG. button to add the track every after
blinking a track number by pressing skip buttons.
❸ Press the STOP button to complete the programming phase. The 1st playback track number
is displayed. If 32 tracks are programmed "FULL" is displayed as well.
Playback order
"PRGM" is displayed, and "1" as temporary track
number blinks and "1" as the first playback order
is displayed.
❷ Select a track number by pressing the numeric
keys on the remote control unit. The selected
CD3N User's Manual
19