C.E.C. CD3N Owner's Manual page 18

CD PLAYER CD3N
DISP button cycles the display in the following order: track number/elapsed track time (default
display) track number/remaining track time total remaining time total elapsed time
back to track number/elapsed track time (default display).
e
r r
e
NOTE: Total remaining time and total elapsed time will not be displayed when program mode
and/or repeat mode are active.
DF Button
Press to select a digital filter FLAT or PULSE.
● Precautions on Using the Remote Control Unit
❶ When operating the remote control, point it towards the remote sensor on the CD3N's front
panel. Make sure nothing is blocking the front panel where the remote sensor is located.
❷ Avoid exposing the remote sensor on the front panel to direct sunlight or other light sources,
as such exposure can cause malfunction.
❸ The remote control unit may malfunction when its batteries are running low. Change the
batteries to new ones of the same type if this seems to be the case.
● Battery Installation
Remove the cover of the battery compartment. Insert the supplied two AAA batteries into the
compartment. Make sure that the batteries are inserted with their
positive (+) and negative (-) poles positioned correctly, and put the
cover back on.
● Battery Replacement
If the distance at which the remote control unit can be used to operate
the CD3N seems to be decreasing, replace both batteries with new ones.
● Battery Precautions
❶ Never use different types of batteries together. Both rechargeable and non-rechargeable
batteries can be used, but the two should not be used together.
❷ If you will not be using the remote control unit for an extended period of time (more than a
18