Front Panel Functions - C.E.C. CD3N Owner's Manual

CD PLAYER CD3N

Front Panel Functions

❶
❶ POWER Button
Press the POWER button to turn the power ON or OFF. The switch will light up with a blue
color while power is ON. When the CD3N is turned on, the display will blink "0 0:00" and
the unit will check its tray for a compact disc. Approximately 5 seconds later, the display will
change to indicate the total number of tracks and the total playing time. If there is no disc on
the tray, the display will indicate "no dISC".
❷ Remote Sensor
The remote sensor, which receives signals from the remote control unit, is located to the left
side of the display. Aim for this sensor when using the remote control unit. The remote control
may malfunction if there are any obstacles between the remote control unit and the remote
sensor.
❸ Display Panel
After reading a table of contents (disc information) the display panel indicates the total number
of tracks and total playback time, and during playback the track number being played and
elapsed time are displayed.
A. Playback ▷ indicator: lights up during playback
B. Pause
C. Time display: indicates the elapsed time/
remaining time for the track being played, total
remaining time or total elapsed time
D. Programming indicator: lights up during program
mode
E. Track number display: indicates the track being played
F. Repeat indicator: lights up when repeat mode is enabled
10
❷
indicator: blinks during pause mode
❹ ❺
❸ ❻
BELT DRIVE CD PLAYER CD3N
❼ ❽ ❾
A B C
D E F