Page 1
BELT DRIVE CD TRANSPORT Owner's Manual Thank you for purchasing a TL5. Please read through and refer to this Owner's Manual to use your TL5 safely and adequately. It is recommended to keep the packaging available for future transportation needs.
Contents Features Features ................2 □ The new TL5 is a CD transport that uses CEC's proprietary belt-drive mechanism to minimize the Important Safety Instructions ..........3 vibration and electromagnetic noise from the spindle Handling Precautions ............4 motor. Compact Disc Handling ..........5 A high precision CD stabilizer, which is a must for Accessories ..............6...
Important Safety Instructions 10) Protect this appliance’s power cord from being CAUTION walked on or pinched, especially around the plugs, convenience receptacles, and where it exits from this RISK OF ELECTRIC SHOCK! DO NOT OPEN! appliance’s casing. 11) Only use attachments/accessories specified by the CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, manufacturer.
Handling Precautions cause this appliance’s metal parts to rust, causing ❶ Connecting Other Devices Unplug the AC power cord from the outlet before this appliance to malfunction. connecting or disconnecting other devices. Exercise □ Dusty locations may cause this appliance to caution when handling the AC power cord.
Compact Disc Handling □ When taking a compact disc from its case, lift it out by □ Do not use cracked discs or irregularly shaped discs holding the edge of the disc while pressing down on (octagonal, heart-shaped, or any other special shapes). the center button of the case.
. . , L I V E ld in T TL □ Keep the packaging available for future transportation needs. □ The power cord is for use with the TL5 exclusively, and should not be used for other devices.
fi ngers, etc., and always close the CD door. 3-pin AC power cord ❷ CD Stabilizer to a wall outlet The CD Stabilizer for TL5 is heavy with a diameter of 7cm and weighing 330g. to a D/A converter Handle with care. Hold the edge stead-...
OFF. indicates the total number of tracks and total playback When TL5 is turned on ❻ display will blink " 0 0:00 " time, and during playback the track number being and the unit will check its tray for a compact disc.
Remote Control unit ❹ CLEAR button Press to clear the current programmed setting. Refer to " Programmed CD Playback " on page 12 for details. ❺ PROGRAM button Press to enable programmed playback. Refer to " Programmed CD Playback " on page 12 for details. ❻...
If the distance at which the remote control unit can be connection of CD stabilizer to a disc might cause an used to operate TL5 seems to be decreasing, replace unstable rotation resulting in the ability to read music both batteries with new ones.
NOTE: Do not leave a disc on the CD-turntable when the TL5 is not in use. Skipping track Press the Skip forward or backward button to jump to the next or previous track from the track being played (or displayed).
Programmed CD Playback Programming Playback in Program Mode Press the PLAY/PAUSE / button while the " PRGM " Up to 32 tracks in a customized playback order can indicator is shown on the display to play the programmed be programmed by using the remote control unit while tracks.
CD player is not used for clean maintenance of the laser pick-up lens. Maintenance ❶ If the surface of the TL5 case becomes soiled, wipe with a soft cloth or use diluted neutral cleaning liquid. Be sure to remove any fluid completely. Do...
Maintenance of Rubber Belt ❸ Then mount the belt to the motor pulley groove. Using Periodical maintenance or check is not required a pair of tweezers would be easier to mount. for a rubber belt used for all CEC belt- drive CD transports and players.
TL5 contains a microcomputer that can malfunction due to the external noise or interference. If this seems to be the case, turn the unit off and wait for a short while before turning it back on and trying again...
Need help?
Do you have a question about the TL5 and is the answer not in the manual?
Questions and answers