Programmed Playback - C.E.C. TL3N Owner's Manual

CD TRANSPORT TL3N

Programmed Playback

18
❷ Avoid exposing the remote sensor on the front panel to direct sunlight or
other light sources, as such exposure can cause malfunction.
❸ The remote control unit may malfunction when its batteries are running
low. Change the batteries to new ones of the same type if this seems to be
the case.
● Battery Installation
● Battery Replacement
If the distance at which the remote control unit can be used to operate the
TL3N seems to be decreasing, replace both batteries with new ones.
● Battery Precautions
❶ Never use different types of batteries together. Both rechargeable and non-
rechargeable batteries can be used, but the two should not be used together.
❷ If you will not be using the remote control unit for an extended period of
time (more than a month), remove the batteries to prevent leakage.
❸ If the batteries leak, use a cloth to wipe away the liquid inside the battery
compartment and replace the batteries with new ones.
❹ Do not heat or disassemble batteries, and never dispose of old batteries
by throwing them in a fire. Dispose of batteries following laws in the local
area
● Programming
You can program up to 32 tracks in a customized playback order, by using
the remote control unit while playback is stopped.
❶ Press the PROGRAM button on the remote control unit to activate the
program mode. "PRGM" is displayed, and "1" as temporary track number
blinks and "1" as the first playback order is displayed.
Track number
Remove the cover of the battery compartment.
Insert the supplied two AAA batteries into the
compartment. Make sure that the batteries are
inserted with their positive (+) and negative (-)
poles positioned correctly, and put the cover
back on.
Playback order