Remote Control Unit - C.E.C. CD3N Owner's Manual

Remote Control Unit

●Key Functions
❶ to buttons can be used for CD3N and the other buttons for D/A converter
model DA3N.
❶ Numeric Keys
Use these keys to select tracks directly during playback, or when entering a
programmed playback order. To select ex.4-track press +10 twice and then 4.
❷ REPEAT Button
Press this button to repeatedly playback all the tracks on a disc. When repeat
mode is on, the display will show the repeat
again to cancel repeat mode.
❸ PROGRAM Button
Press this button to enable programmed playback. You can program up to 32
tracks to playback in the order of your choice.
*Refer to "PROGRAMMED PLAYBACK" on page 18 for details.
❹ CHECK Button
Press this button to check the order of the tracks in your current programmed setting. *Refer to
"PROGRAMMED PLAYBACK" on page 18 for details.
❺ CLEAR Button
Press this button to clear your current programmed setting. *Refer to "PROGRAMMED
PLAYBACK" on page 18 for details.
❻ Track Skip Backward
Jump to the previous or next track from the track being played (or displayed).
❼ PLAY/PAUSE / Button
Press this button to start playback or to pause playback temporarily.
❽ Search Backward
Press and hold these buttons to quickly search through the track being played.
through the track backwards,
NOTE: There are no Search buttons on the front panel of the CD3N.
❾ Stop Button
Press this button to stop playback.
❿ DISP (Display) Button
Press this button to cycle the CD3N's display through its various modes. Each press of the
/ Track Skip Forward
/ Search Forward Buttons
searches forwards.
CD3N User's Manual
indicator. Press this button
Buttons
❶
❷
❺ ❹
❿ ❸
❻
❻
❼
❽ ❽
❾ ❾
searches
17