Remote Control Unit - C.E.C. CD5 Owner's Manual

CD PLAYER / USB SOUND SYSTEM CD5

Remote Control unit

Key Functions
❶ Numeric Keys
❷ REPEAT button
❸ CHECK button
❹ CLEAR button
❺ PROGRAM button
❻ DISPLAY button
❼ Search
14
Press to select a track directly for play-
back or to enter a programmed playback
order. To select ex. 4-track press +10
twice and then 4.
Press to repeatedly playback all the
tracks on a disc. When repeat mode
is on, the display will show the repeat
indicator. Press again to cancel the
repeat mode.
Press to check the order of tracks in your
current programmed setting. Refer to
"PROGRAMMED CD PLAYBACK" on
page 19 for details.
Press to clear the current programmed
setting. Refer to "PROGRAMMED CD
PLAYBACK" on page 19 for details.
Press to enable programmed playback.
Refer to "PROGRAMMED CD PLAY-
BACK" on page 19 for details.
Press to cycle the display through various mode. Each press of the DISPLAY
button cycles the display in the following order: track number/elapsed track time
(default display) track number/remaining track time
total elapsed time back to track number/elapsed track time (default display).
(default)
r
e
▷ Total remaining time and total elapsed time will not be displayed when program
mode and/or repeat mode are active.
button
/
Press and hold the button to quickly search through the track being played.
searches through the track backwards, and
❷
❹
❻
❽
❾
total remaining time
e
r
searches forwards.
❶
❸
❺
❼
❿