Front Panel Functions - C.E.C. TL3N Owner's Manual

CD TRANSPORT TL3N

Front Panel Functions

❶
10
❺
❷
❶ POWER Button
Press the POWER button to turn the power ON or OFF. The switch will light
up with a blue color while power is ON. When the TL3N is turned on, the
display will blink "0 0:00" and the unit will check its tray for a compact disc.
Approximately 5 seconds later, the display will change to indicate the total
number of tracks and the total playing time. If there is no disc on the tray, the
display will indicate "no dISC".
❷ Remote Sensor
The remote sensor, which receives signals from the remote control unit, is
located to the left of the display. Aim for this sensor when using the remote
control unit. The remote control may malfunction if there are any obstacles
between the remote control unit and the remote sensor.
A B
D E
played and elapsed time are displayed.
A. Playback ▷ indicator: lights up during playback
B. Pause indicator: blinks during pause mode
C. Time display: indicates the elapsed time/remaining time for the track being
played, total remaining time or total elapsed time
D. Programming indicator: lights up during program mode
E. Track number display: indicates the track being played
❸ ❹
❸ Display Panel
C
After reading a table of contents
(disc information) the display panel
indicates the total number of tracks
and total playback time, and during
F
playback the track number being
❻ ❼ ❽