Sony Trimaster PVM-L2300 Operation Manual page 98

color space setting of the signal
reproduced by the PVM-L2300
Operating conditions
Temperature 0 °C to 35 °C (32 °F to 95 °F)
Optimum temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 0% to 90% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature –20 °C to +60 °C (–4 °F to +140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC plug holder (1)
Bracket (1)
Connection cable for color temperature adjustment (1)
Operation Manual (Japanese, English, each 1)
CD-ROM (1)
Using the CD-ROM Manual (1)
Optional accessories
BKM-16R Monitor Control Unit
BKM-37H/BKM-38H Controller Attachment Stand
SMF-700 Monitor Interface Cable, Sony
BKM-23M Monitor Protection Panel
BKM-220D SDI 4:2:2 Input Adaptor (with serial number
2100001 or higher)
BKM-227W NTSC/PAL Input Adaptor
BKM-229X Analog Component Input Adaptor (with serial
number 2200001 or higher)
BKM-243HS HD/D1-SDI Input Adaptor (with serial
number 2108355 or higher)
BKM-244CC HD/SD-SDI Closed Caption Adaptor
BKM-250TG 3G/HD/SD-SDI Input Adaptor (with serial
number 7100001 or higher)
Note
BKM-220D: This equipment may not meet the
requirement for the electromagnetic interference standard
if an input adaptor with a serial number that is not
designated is installed.
BKM-229X: This equipment may not work correctly or
you may not be satisfied with the performance if an input
98
Specifications
x y
R 0.643 0.334
G 0.212 0.673
B 0.150 0.060
(Typical)
adaptor with a serial number that is not designated is
installed.
BKM-243HS: This equipment may not meet the
requirement for the electromagnetic interference standard
or work correctly, or you may not be satisfied with the
performance if an input adaptor with a serial number that is
not designated is installed.
BKM-250TG: The 3D signal analyzing function does not
operate if an input adaptor with a serial number that is not
designated is installed.
Design and specifications are subject to change without
notice.
Notes
• Always make a test recording, and verify that it was
recorded successfully.
SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF
FAILURE OF THIS UNIT OR ITS RECORDING
MEDIA, EXTERNAL STORAGE SYSTEMS OR
ANY OTHER MEDIA OR STORAGE SYSTEMS
TO RECORD CONTENT OF ANY TYPE.
• Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.