Sony Trimaster PVM-L2300 Operation Manual page 65

Menu
Marker
Aspect Marker
Area Marker 1
Area Marker 2
Side by Side
Black Detail Mode
Audio Level Meter
Function and operation ([
Sets whether or not to display all markers ([Off] or On).
Note
The marker is not displayed in the following cases:
• When the input signal has no sync signal
• When the internal signal is displayed
• When Format of the Input Configuration menu is set to DVI Computer
• When the HDMI computer signal is input
• When H Delay/V Delay is set to On
• When Side by Side is set to On
• When Pixel Zoom is set to on
Sets whether or not to display the aspect marker ([Off] or On).
Note
The aspect marker is not displayed in the following cases:
• When the input signal has no sync signal
• When the internal signal is displayed
• When Format of the Input Configuration menu is set to DVI Computer
• When the HDMI computer signal is input
• When H Delay/V Delay is set to On
• When Side by Side is set to On
• When Pixel Zoom is set to on
Sets whether or not to display the area marker 1 ([Off] or On).
Note
The area marker 1 is not displayed in the following cases:
• When the input signal has no sync signal
• When the internal signal is displayed
• When Format of the Input Configuration menu is set to DVI Computer
• When the HDMI computer signal is input
• When H Delay/V Delay is set to On
• When Side by Side is set to On
• When Pixel Zoom is set to on
Sets whether or not to display the area marker 2 ([Off] or On).
Note
The area marker 2 is not displayed in the following cases:
• When the input signal has no sync signal
• When the internal signal is displayed
• When Format of the Input Configuration menu is set to DVI Computer
• When the HDMI computer signal is input
• When H Delay/V Delay is set to On
• When Side by Side is set to On
• When Pixel Zoom is set to on
Sets whether or not to display in the side by side display ([Off] or On).
Note
The side by side display is not set in the following cases:
• When the internal signal is displayed
• When Pixel Zoom is set to on
Sets whether or not to display the signal in black detail mode ([Off] or On).
Notes
• The black detail mode is not set in the following cases:
– When Interlace is set to On
– When Black Frame Insertion is set to On
– When H Delay/V Delay is set to On
• Use the controller with software version 1.3 or higher to assign this function to the function
button of the controller.
Sets whether or not to display the audio level meter ([Off] or On).
Notes
• When the option slot number in which the BKM-250TG is installed is not selected in Slot No
of the Input Configuration menu, the audio level meter cannot be displayed.
• Use the controller with software version 1.4 or higher to assign this function to the function
button of the controller.
]: factory setting)
65
Display Function Menu