Sony Trimaster PVM-L2300 Operation Manual page 81

Menu
Monitor ID Display
Controller Upgrade
Software Upgrade
Kernel Upgrade
Function and operation ([
Area Marker 1: An area marker 1 is displayed on the screen.
Note
When External Sync is set to On, the marker may not be shown in the correct position.
Area Marker 2: An area marker 2 is displayed on the screen.
Note
When External Sync is set to On, the marker may not be shown in the correct position.
Side by Side: The screen is displayed in the side by side display mode.
Wipe: The screen is displayed in the wipe display mode. (for BVM-L series)
Butterfly: The screen is displayed in the butterfly display mode. (for BVM-L series)
Blending: The screen is displayed in the blending display mode. (for BVM-L series)
Error Notify Clear: Clears the notification detected in the gamut error detection. (for
BVM-L series)
Degauss: The CRT is degaussed (only for BVM-A series).
Black Detail Mode: The signal is displayed in black detail mode.
Audio Level Meter: The audio level meter is displayed.
ALM Hold Reset: The peak hold of the audio level meter is canceled.
Time Code: The time code is displayed.
Checkerboard: The left and right 3D video signals are displayed in a checkerboard
pattern. When the button is set to off, only the currently selected left or right signal is
displayed (normal display).
L/R Switch: The left and right 3D video signals are displayed alternately by switching.
When the button is set to off, only the currently selected left or right signal is displayed
(normal display).
Note
A 3D-compatible BKM-250TG (with serial number 7100001 or higher) is required in order
to assign Checkerboard or L/R Switch to the function button.
Sets display mode of the display window.
[On]: Always displayed.
Auto: Displayed during operating by the remote connection and disappears
automatically after operation.
Off: Not displayed.
Upgrades the controller.
When the item is selected, the screen for inputting the password is displayed.
After the 4-digit password is entered, the current versions of Software Version and Kernel
Version are displayed.
For the password, see Password (page 71) of the System Configuration menu.
For details on upgrading the controller, see "Upgrading the Monitor and Controller" on page
94.
Upgrades the software for the controller.
Upgrades the kernel of the controller.
]: factory setting)
81
Controller Menu