Camera Section Adjustment - Sony DSR-PD170 Service Manual

DSR-PD170/PD170P/PD190P

6-1. CAMERA SECTION ADJUSTMENT

1-1. PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1. List of Service Tools
• Oscilloscope
• Regulated power supply
Ref. No.
J-1 Filter for color temperature correction (C14)
ND filter 1.0
J-2
ND filter 0.3
J-3 Pattern box PTB-450
J-4 Color chart for pattern box
J-5 Adjustment remote commander
J-6 Siemens star chart
J-7 Clear chart for pattern box
J-8 CPC-13 jig
J-9 Extension cable (50P, 0.5mm)
J-10 Mini pattern box
J-11 Camera table
J-12 Cleaning fluid
J-13 Wiping cloth
Super fine applicator
J-14
(made by NIPPON APPLICATOR (P752D))
J-15 Mirror (Small oval type)
J-16 Screwdriver for tape path
J-17 Torque driver
J-18 TG1 adjustment jig
J-19 Mode selector conversion board (C)
J-20 Tracking tape (XH2-1A1)(NTSC/PAL)
J-21 Mini DV torque cassette
J-22 Mode Selector
J-23 Mode Selector
J-24 Bending stick
Note:
ROM for version upgrading to allow use of the mode selector II
with the C mechanism.
• Color monitor
• Digital voltmeter
Name
ROM
• Vectorscope
Parts Code
Auto white balance adjustment/check
J-6080-058-A
White balance adjustment/check
J-6080-808-A White balance check
J-6080-818-A White balance check (2 sheets used)
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A For checking the flange back
J-6080-621-A
For adjusting the video section
J-6082-443-A
For adjusting the viewfinder
For extension between the CD-512 board (CN100) and
J-6082-496-A
the VC-358D board (CN025)
J-6082-353-B For adjusting the flange back
J-6082-384-A For adjusting the flange back
Y-2031-001-0
7-741-900-53
—
J-6080-840-A
J-6082-026-A Tape path for adjusting tape guide
J-9049-330-A
J-6082-420-A FWD position adjustment
J-6082-417-A
8-967-999-03
J-6082-360-A For FWD torque, REV torque and FWD back tension
J-6082-282-A For all operating
J-6082-314-D Corresponds to C mechanism (Note)
J-6082-419-A
6-4
Usage