DCR-TRV16/TRV16E/TRV18/TRV18E/TRV116E/TRV118E
5-1. CAMERA SECTION ADJUSTMENT
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
• Oscilloscope
• Regulated power supply
Ref. No.
J-1
Filter for color temperature correction (C14)
ND filter 1.0
J-2
ND filter 0.4
ND filter 0.1
J-3
Pattern box PTB-450
J-4
Color chart for pattern box
J-5
Adjustment remote commander
(RM-95 upgraded) (Note)
J-6
Siemens star chart
J-7
Clear chart for pattern box
J-8
CPC-8 jig
J-9
Extension cable (100P, 0.5mm)
J-10
Mini pattern box
J-11
Camera table
Note: If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), the pages cannot
be switched. In this case, replace with the new micro processor (8-
759-148-35).
J-1
J-6
J-11
• Color monitor
• Digital voltmeter
Name
J-2
J-3
J-7
J-8
• Vectorscope
Parts Code
Auto white balance adjustment/checkWhite balance
J-6080-058-A
adjustment/check
J-6080-808-A
White balance check
J-6080-806-A
White balance check
J-6080-807-A
White balance check
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
For checking the flange back
J-6080-621-A
For adjusting the video section
J-6082-388-A
For adjusting the color viewfinder
For adjusting the LCD block
For extension between the VA-117 board (CN4002) and
J-6082-352-A
the VC-280 board (CN1007)
J-6082-353-B
For adjusting the flange back
J-6082-384-A
For adjusting the flange back
J-4
J-9
Fig. 5-1-1.
5-4
Usage
J-5
J-10