Cisco TelePresence MX800 Single Installation Manual page 9

Installation guide for Cisco TelePresence MX800 Single - Wall mount
Read before you mount the monitors
The monitor is heavy
We recommend four people working
together to mount the monitor. Two
90 kg / 200 lb
people should lift the monitor using
the handles as described here. The
other people must help stabilizing the
4
monitor and check that the monitor
enters the slots properly.
The screws with wing nut, which you can see
from the sides of the monitor, must enter the
center slot on each side of the lower frame.
78-100255-02A0 | AUGUST 2015 | © 2015 Cisco Systems, Inc. All rights reserved.
Use lifting handles
To avoid trapping your fingers, use the lifting
handles at the bottom of the monitor.
When you lift and place the monitor onto the
wall brackets, keep the monitor close to the
wall so the clamps on the rear side of the
monitor slide fully onto the top wall bracket.
Page 9