Power Button Board - HP Compaq 14 Maintenance And Service Manual

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Service cover (see
●
Keyboard (see
●
Top cover (see
To remove the power button board:
1. Position the top cover upside down.
2. Remove the Phillips PM2.0×3.0 screw (1) that secures the power button board to the top cover.
3. Lift the board and cable up and remove from the top cover (2).
Reverse this procedure to install the power button board and cable.
Battery on page 49), and then remove the following components:
Service cover on page
Keyboard on page 57)
Top cover on page 60)
55)
Component replacement procedures
Spare part number
757607-001
65