HP Compaq 14 Maintenance And Service Manual page 132

CAUTION:
have created and any software installed on the computer are permanently removed. The recovery tool
reinstalls the original operating system and HP programs and drivers that were installed at the factory.
Software, drivers, and updates not installed by HP must be manually reinstalled. Personal files must be
restored from a backup.
To restore the computer using the HP Factory Image Restore DVD, you must first create the recovery disc. To
create the recovery disc:
NOTE: HP recommends that you create the HP Factory Image Restore DVD in the event of a system failure.
1. Select Computer > More Applications.
2. In the left pane, click Tools, and then click Create HP Factory Image Restore DVD in the right pane.
3. Follow the on-screen instructions to create an image file to burn a recovery disc.
To restore the computer from the recovery disc, follow these steps:
1. If possible, back up all personal files.
2. Insert the HP Factory Image Restore DVD into the optical drive and restart the computer.
3. As the computer is restarting, press
4. Press the down arrow to select Restore SLED HP-BNB preload image from the Linux boot menu, and
then press enter.
5. Using the arrow keys, select Yes when prompted: Do you want to start the System-Restore?
6. Follow the on-screen instructions.
NOTE: You can also restore the computer from the partition by restarting the computer, and then pressing
the f11 key.
If you are unable to boot (start up) your computer from the hard drive partition with the primary operating
system or from the recovery partition, and you did not create a system recovery disc, you must purchase a
SUSE Linux Enterprise Desktop Operating System DVD to reinstall the operating system. For additional
information, see the Worldwide Telephone Numbers booklet.
124 Chapter 11 Backup and Recovery in SUSE Linux
Using Recovery completely erases hard drive contents and reformats the hard drive. All files you
f9 to open the Computer Setup boot option menu.