Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket.
Description
1-GB, 5400-rpm
750-GB, 5400-rpm (HP 14 and Compaq 14 models only)
750-GB, 5400-rpm (HP 240/246 and HP 245 G3 models only)
500-GB, 5400-rpm (HP 14 and Compaq 14 models only)
500-GB, 5400-rpm (HP 240/246 and HP 245 G3 models only)
500-GB, 5400-rpm, 7 mm (HP 240/246 G3 models only)
Hard Drive Hardware Kit (includes bracket and screws)
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Service cover (see
●
Keyboard (see
●
Top cover (see
●
USB board (see
To remove the hard drive:
1.
Remove the right speaker by removing the two Phillips broadhead PM2.0×2.0 screws (1), removing the
speaker cable from the clips in the chassis (2), and lifting the speaker from the base enclosure (3).
68
Chapter 4 Removal and replacement procedures
Battery on page
49), and then remove the following components:
Service cover on page
Keyboard on page
57)
Top cover on page
60)
USB board on page 67
55)
Spare part number
778192-005
778190-005
634250-005
778188-005
669299-005
683802-005
758615-001