Table of Contents
Advertisement
Description
Webcam/microphone module, HD
Webcam/microphone module, VGA
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Service cover (see
●
Keyboard (see
●
Top cover (see
●
Fan (see
Fan on page
To remove the display assembly:
1.
Disconnect the display panel cable from the system board (1) and remove the cable from the routing
channel in the left side of the base enclosure.
2.
Release the wireless antenna cables from the WLAN module (2) and remove the cables from the routing
channel in the right side of the base enclosure.
CAUTION:
Support the display assembly when removing the following screws. Failure to support the
display assembly can result in damage to the display assembly and other computer components.
Battery on page
49), and then remove the following components:
Service cover on page
Keyboard on page
57)
Top cover on page
60)
74)
55)
Component replacement procedures
Spare part number
757614-001
781623-001
77
Hide quick links:
Advertisement
Table of Contents
