Table 11: Basic Settings - Grandstream Networks DP715 User Manual

End User Password
Web Port
Telnet Server
IP Address
DHCP hostname
DHCP vendor class ID
PPPoE account ID
PPPoE password
PPPoE Service Name
Preferred DNS server
Time Zone
Self-Defined Time Zone
Allow DHCP server to
set Time Zone
Language
Reset Type
Firmware version 1.0.0.31

Table 11: BASIC SETTINGS

Password to access the Web Configuration Menu. This field is case sensitive with a
maximum length of 25 characters.
By default, HTTP uses port 80. This field is for customizable web port.
Default is set to YES.
There are two modes to operate the DP715:
DHCPmode: all the field values for the Static IP mode are not used (even though they
are still saved in the Flash memory.) The DP715 acquires its IP address from the first
DHCP server it discovers from the LAN it is connected. Using the PPPoE feature: set the
PPPoE account settings. The DP715 will establish a PPPoE session if any of the PPPoE
fields is set.
Static IP mode: configurethe IP address, Subnet Mask, Default Router IP address, DNS
Server 1 (primary), DNS Server 2 (secondary) fields. These fields are set to zero by
default.
Default is blank. This option specifies the name of the client. This field is optional but may
be required by some Internet Service Providers.
Default is DP7XX. Used by clients and servers to exchange vendor-specific information..
PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to Point Protocol
over Ethernet) connection.
PPPoE account password.
Default is blank. This field is optional. If your ISP uses a service name for the PPPoE
connection, enter the service name here.
The preferred DNS Server to be used
Controls how the date/time is displayed according to the specified time zone.
The syntax is std offset dst [offset],start[/time],end[/time]
Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0
MTZ+6MDT+5,
Time zone with 6 hours offset with 1 hour ahead which is the US central time. It is positive
(+) if the local time zone is west of the Prime Meridian and negative (-) if it is east.
Prime Meridian (a.k.a: International or Greenwich Meridian)
M3.2.0,M11.1.0
st
The 1 number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
nd
The 2 number indicates the n
rd
The 3 number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat)
Therefore, this example is the DST which starts from the second Sunday of March to the
1st Sunday of November.
Default No. Let the DHCP server handle the Time Zone
Languages supported with voice prompt and web interface, except Spanish that it is only
in IVR.
• Full Reset: This will make a full reset
• ISP Data: This will reset only the basic settings, like IP mode, PPPoE and Web port
• VOIP Data: This will reset only the data related with a service provider like SIP server,
sip user ID, provisioning and others.
DP715/DP710 User Manual
th
iteration of the weekday: (1st Sunday, 3rd Tuesday etc)
Page 39 of 56